1. Why can't LPG cylinders and stoves be installed in the bedroom?
Install LPG cylinders and stoves in the bedroom, if there is a gas leak, it will simply cause suffocation, fire or explosion.
2. How to prevent damage and leakage of the switches on the stove and gas cylinders?
It is necessary to correctly grasp the use of the switch, and always pay attention to and educate children not to play with the switch. Due to breaking the switch or forgetting to close it, it is easy to form air leaks, causing fires or other incidents.
3. Why should someone take care of the use of LPG?
When using liquefied fossil gas, it is necessary to pay attention to the incineration situation at any time, adjust the size and color of the flame, and maintain normal incineration. Avoid boiling the soup to extinguish the flame, or use a small fire when the flame is blown out by the wind, the switch is not turned off, so that a lot of liquefied gas leaks out, and the open flame will form a fire or explosion.
4. What are the reasons for simple air leakage?
(1) The switch on the cylinder is not closed properly or the capping nut under the handwheel is not tightened;
(2) Aging, cracking, burning or loose socketing of oil-resistant hoses;
(3) The switch on the stove is not tight;
(4) The handwheel of the pressure reducing valve is not tightened or the rubber gasket is lost, damaged, deformed, or falling off.
5. How to identify the leakage of LPG cylinders and stoves?
Every time after replacing the gas cylinder or smelling a special odor, or finding that the sealing rubber sleeve is damaged, the user can use soapy water to apply all joints, if there are bubbles, it means air leakage. It is forbidden to check for air leaks with an open flame.
6. What should I do if I find an air leak?
(1) If air leakage is found, immediately close the angle valve switch and open the doors and windows for ventilation, prohibit all kinds of fires from approaching, and do not switch on and off lights or other electrical equipment, please provide the unit personnel for processing.
(2) If there is a lot of air leakage, and the angle valve switch fails, * to strictly prevent all kinds of fire from approaching, do not turn on the lamp, or other electrical equipment, in addition to the alarm should be immediately, to try to use plastic cloth and other materials to force the bundle to block the leakage, and please supply the unit personnel to deal with.
