A cylinder is a steel cylinder that stores high-pressure oxygen, coal gas and petroleum liquefied gas. Gas cylinders generally contain liquefied gases or gas mixtures. This handling is generally operated by professional staff, and we can understand it specifically and add one more knowledge point.
1. When transporting gas cylinders, it is necessary for operators to understand the title, nature and safety handling of the gas in the cylinder, and prepare the corresponding tools and protective equipment, such as when the medium is harmful, toxic, corrosive, radioactive and self-combustible gas, corresponding measures should be formulated in terms of organization and management, technical measures, personal protection, health care, etc.
Second, the center of the concave bottom gas cylinder in the workshop, warehouse, construction site, loading and unloading site handling, can be rolled with bare hands, that is, with one hand to hold the bottle cap, so that the bottle body is skewed, the other hand to promote the bottle body along the ground rotation, with the bottom of the bottle while walking and rolling, can also be used to hold a cylinder cap with both hands, so that the two cylinders in front of the chest cross rolling, which depends on the distance and the proficiency of the mover, but not allowed to drag, roll with the ground, slide down the slope or kick with the foot.
3. The square base gas cylinder should be fixed with a safe and labor-saving specific trolley (single or double bottle position, lined with a padded trolley) and fixed with iron chains. It is forbidden to carry it on the shoulder, on the back, on the shoulder, on the arm, on the arm, on the lift, or by two people, so as to avoid damage to the body and the breaking of the cylinder into an incident.
Fourth, the cylinder should wear a bottle cap, to wear a fixed bottle cap, in order to avoid the bottle valve due to force damage during the handling process, or even the bottle valve flying out of the incident.
5. After the gas cylinder is transported to the destination, the ground where the gas cylinder is placed must be flat. When placing the cylinder, put it upright and steady, so that you can let go and withdraw to prevent the cylinder from falling and becoming an incident:
6. When it is necessary to manually lift the gas cylinder to a high place or put the gas cylinder on the ground from a high place, it is necessary for two people to operate together, and it is required that the lifting and landing actions are coordinated, the attitude is correct, and the throwing and throwing are stopped when lifting, and slipping and falling when dropping.
7. The loading and unloading of gas cylinders shall be carried out lightly, and the loading and unloading of gas cylinders shall be prohibited by throwing, slipping, falling, rolling, bumping, etc., so as to avoid incidents caused by barbaric loading and unloading;
8. Prohibit the use of dump trucks, forklifts or forklifts to carry gas cylinders.